Use of the constant current method eliminates the need to reset test currents even in the face of fluctuating resistance values for the device being tested. The test duration can also be set from 0.3 s, making the tester suitable for production line testing, which requires reduced cycle time.
This tester is also designed for ease of use, featuring a large, easy-to-read display, memory capacity for storage of 100 types of test conditions, and incorporation of test conditions into programs to enable automatic testing. Standard GPIB and RS-232C interfaces allow the user to use PCs or other devices to control test conditions such as test current, resistance value for judgement, and test duration, and enables read-back of measured values and test results.
The tester is also provided with test leads as standard and provides high cost effectiveness.

Remarks: Major changes

Model	(New) TOS6200A	(Old) TOS6200
Panel Changes
Input voltage range	85V – 250V	85V – 132V or 170V – 250V
The maximum power consumption	280VA	450VA（100V model） 330VA（100V/200V model）

Features

Data Sheet

• Provided with the discharge function
• Equipped with the window comparator
• Hold function (which holds the measured resistance at the end of testing while PASS judgment is being output)
• Provided with the timer function
• Rear output terminals
• Measured-value monitoring terminals
• Equipped with the panel memory (enabling 10 different settings to be stored)
• Equipped with the SIGNAL I/O connector and remote control terminal
• Equipped with the RS-232C interface as standard

Data Sheet

 
All Models

Color LCD Screen for Improved Visibility!
A brand-new 7-inch LCD display allows for easy access to your custom settings, standard outlines and blueprints for easy operation.

AC Hipot Testing with Stable Output [Input Voltage Variation: ±0.3%]
Conventional hipot testers utilize a slide transformer to output AC line voltage. This design is susceptible to input voltage fluctuation, with outside electrical influence affecting the test results. This can result in distorted voltage being applied to the EUT which can cause product malfunctions down the line due to component malfunction. The TOS9300 series utilizes a highly efficient PWM amplifier capable of stable high-voltage output that is unaffected by changes in the AC power line. The TOS9300 series allows for safe, stable, and highly reliable tests regardless of AC power line instability.

Automatic Testing Feature
Tests can be combined and configured to execute automatically over long periods of time. Automotic tests are composed of programs and steps, which can be configured to initiate one after another.

Contact/Protective Conductor/ Patient Leakage Current Test (TOS9303LC)
The TOS9300 series can conduct leakage current (patient current) tests for highly sensitive medical devices. Measurement networks can be easily configured via the front panel.

All Electrical Safety Standard Tests in One Device! (TOS9303LC)
The TOS9303LC is the “all-rounder” model which supports AC/DC withstanding voltage, insulation resistance, AC/DC earth continuity and leakage currents tests in a single device. It can also be used for contact current, protective conductor current and patient leakage current tests.

Rise Time/Fall Time Control Function
The rise time control function prevents unnecessary stress from being applied to the EUT.

Electrical safety standard testing for automotive components
Compatible with both AC and DC, the TOS9303LC complies with a wide varety of safety tests for EV batteries, automotive charging devices and charging connectors. This “all-in-one” safety analyzer can meet the needs of nearly all automotive electrical safety standards.

Other Feartures

• User-Friendly 10Key Configuration
• Easy Firmware Updates via USB
• LAN/USB/RS232C Standard Digital Interface
• I/V Monitor Terminal (Analog Monitor)
• STATUS OUT Connector
• SIGNAL I/O Connector
• High Precision/High Resolution/High Speed
• Programmable Detection Response Speed
• 7.2 kV/100 W DC Hipot Test
• Positive Electrode/Negative Electrode Insulation Resistance Testing
• Electric Discharge Function
• AC/DC Earth Continuity Testing up to 40 A
• EARTH FAULT Protection
• Offset Cancel
• Basic Memory Function
• Calibration Deadline Notification
• High-voltage scanner (Option)

Data Sheet

Color LCD Screen for Improved Visibility!
A brand-new 7-inch LCD display allows for easy access to your custom settings, standard outlines and blueprints for easy operation.

AC Hipot Testing with Stable Output [Input Voltage Variation: ±0.3%]
Conventional hipot testers utilize a slide transformer to output AC line voltage. This design is susceptible to input voltage fluctuation, with outside electrical influence affecting the test results. This can result in distorted voltage being applied to the EUT which can cause product malfunctions down the line due to component malfunction. The TOS9300 series utilizes a highly efficient PWM amplifier capable of stable high-voltage output that is unaffected by changes in the AC power line. The TOS9300 series allows for safe, stable, and highly reliable tests regardless of AC power line instability.

Automatic Testing Feature
Tests can be combined and configured to execute automatically over long periods of time. Automotic tests are composed of programs and steps, which can be configured to initiate one after another.

Contact/Protective Conductor/ Patient Leakage Current Test (TOS9303LC)
The TOS9300 series can conduct leakage current (patient current) tests for highly sensitive medical devices. Measurement networks can be easily configured via the front panel.

All Electrical Safety Standard Tests in One Device! (TOS9303LC)
The TOS9303LC is the “all-rounder” model which supports AC/DC withstanding voltage, insulation resistance, AC/DC earth continuity and leakage currents tests in a single device. It can also be used for contact current, protective conductor current and patient leakage current tests.

Rise Time/Fall Time Control Function
The rise time control function prevents unnecessary stress from being applied to the EUT.

Electrical safety standard testing for automotive components
Compatible with both AC and DC, the TOS9303LC complies with a wide varety of safety tests for EV batteries, automotive charging devices and charging connectors. This “all-in-one” safety analyzer can meet the needs of nearly all automotive electrical safety standards.

Other Feartures

• User-Friendly 10Key Configuration
• Easy Firmware Updates via USB
• LAN/USB/RS232C Standard Digital Interface
• I/V Monitor Terminal (Analog Monitor)
• STATUS OUT Connector
• SIGNAL I/O Connector
• High Precision/High Resolution/High Speed
• Programmable Detection Response Speed
• 7.2 kV/100 W DC Hipot Test
• Positive Electrode/Negative Electrode Insulation Resistance Testing
• Electric Discharge Function
• AC/DC Earth Continuity Testing up to 40 A
• EARTH FAULT Protection
• Offset Cancel
• Basic Memory Function
• Calibration Deadline Notification
• High-voltage scanner (Option)

Data Sheet